Administrator’s Manual

The administrator’s manual covers the package installation, maintenance and configuration of a mini-buildd instance.

Where to get it

mini-buildd 1.0 will be available natively in Debian from jessie upwards.

You may also check mini-buildd’s home for apt-lines for other (Debian or Ubuntu) base distributions and snapshot versions.

Installation

To install a mini-buildd instance, just install the Debian package:

# apt-get install mini-buildd

Package configuration (via debconf) include the home path of the mini-buildd user, the administrator’s password and extra options for the daemon run.

Usually, you set the admin password on the initial install, and just leave the rest on default values.

Of course, you can change your settings anytime (including (re-)setting the admin password and changing mini-buildd’s home path) using:

# dpkg-reconfigure mini-buildd

Note

Be sure you have enough space on mini-buildd’s home path (per default /var/lib/mini-buildd) to hold all the repositories (open end, the more the better) and/or chroots. For the latter, as a rule of thumb, you will need about:

(BASE_DISTS * ARCHS * 0.3G) + (CORES * 4G)

disk space free for building.

The mini-buildd user

mini-buildd relies on having a user called mini-buildd; the Unix home of this user is the home of your mini-buildd instance, and the Unix daemon runs with its user id.

In mini-buildd’s home, you will find this top level layout; i.e., these are handled by mini-buildd itself, and should not be touched manually (unless you really know what you are doing, of course):

config.sqlite       mini-buildd's configuration.
incoming/           Directory served by the ftpd.
var/                Variable data: chroots, logs, temp directories, build directories spool.
repositories/       Your valuable repositories.
.gnupg/             The instance's GnuPG key ring.
.mini-buildd.pid    Unix daemon PID file.
.django_secret_key  Some django shit we need.

When you remove the mini-buildd package without purging, it will remove system artifacts (see --remove-system-artifacts option, this currently affects chroots only) that can only be properly removed with mini-buildd installed. Otherwise, mini-buildd’s home (and, of course, the repositories) stay intact.

When you purge the mini-buildd package, all traces will be removed from the system, including your repositories.

Logging and Debugging

Per default, mini-buildd logs

  • to mini-buildd’s log file ~/var/log/daemon.log.
  • via syslog, facility USER (which usually ends up in /var/log/user.log).

The former is handled by mini-buildd itself, including rotating and access to it via API calls.

The latter is the same place where sbuild and friends put their logs by default.

You may control the log level via the --verbose, and extra debug options via the --debug command line flag. The latter allows you to keep temporary files, enable python exception traces or to enable debug options for specific software components used by mini-buildd. Full documentation of these options can be found via mini-buildd --help or the manual page mini-buildd(8).

New in version 1.0.19: Debug option sbuild.

Just use dpkg-reconfigure mini-buildd or edit /etc/default/mini-buildd to set any of these options permanently.

Being a staff user, you can also view mini-buildd’s log via the API call logcat – linked on the web interface or via:

$ mini-buildd-tool --host=my.ho.st:8066 logcat

Debug run in the console

This example gives you a full treat of logs to the console (you may vary with the arguments to suit your needs):

# systemctl stop mini-buildd
# su - mini-buildd
? PYTHONWARNINGS="default" /usr/sbin/mini-buildd --foreground --verbose --verbose --debug=exception,http,webapp

HTTP access log

Mini-buildd also keeps a standard HTTP access log in ~/var/log/access.log.

Configuration

When mini-buildd runs, it’s basically acts as a web server, with a django web application running on it.

mini-buildd’s configuration consists of related django model instances, and their configuration is done via Django’s ‘admin’ application. On the mini-buildd home page, just hit on Configuration (left top) to enter.

You will need to log in as Django user admin, with the password you configured when installing the package (if you chose an insecure password on package install time, now is the time to set a proper one via Django’s user management).

All changes you do here finally wind up in the SQL database at ~/config.sqlite; this config not only represents mere configuration, but also state (of ~mini-buildd/, and in case of chroots, even artifacts on the system, see Model statuses below), so this file cannot be simply interchanged or copied.

Model statuses

Some of the models have a status attached to it.

This usually refers to a model’s associated data on the system (which can be managed via actions in the configuration interface):

Model Associated prepared system data File location (~ denoting mini-buildd’s home path)
Daemon GnuPG Key ~/.gnupg/
Repository Reprepro repository ~/repositories/REPO_ID/
Chroot Chroot data and schroot configuration
  • ~/var/chroots/CODENAME/ARCH/
  • /etc/schroot/chroot.d/mini-buildd-CODENAME-ARCH.conf
  • Some backends (like LVM) may taint other system data

Some other models also use the same status infrastructure, but the associated data is prepared internally in the model’s data (SQL database) only:

Model Associated prepared data
AptKey, Uploader, Remote Public GnuPG Key
Source List of matching archives, selected info from Release file

Status semantics

Status Check status Semantic
Removed   No associated data.
Prepared   Associated data exists. With no flags, data is checked and in-sync. Special conditions to the data may apply:
Prepared Unchecked (-) Needs a manual check run to set things straight.
Prepared Changed (*) Model was changed, but the date is not yet updated. Needs a manual prepare run to set things straight.
Prepared Failed (x) Check failed.
Prepared Failed_Reactivate (A) Check failed, will be automatically activated again as soon as check succeeds again.
Active   Prepared on the system, checked and activated.

Status actions

Status actions can be called from a model’s list view in Django’s admin configuration.

Action Semantic
Prepare Create associated data on the system, or synchronize it with item changes.
Check Check item and/or associated data.
Activate Activate the item, or set the auto-activate flag.
Deactivate Deactivate the item, or remove the auto-activate flag.
Remove Remove associated data from system.

Daemon

The Daemon model represents a configured mini-buildd instance. It is limited to have exactly one instance; when activated, it means the internal FTP server is started acting on *.changes.

Don’t confuse this with the mini-buildd Unix daemon, which is always running when the mini-buildd Debian package is installed, and always provides the HTTP server and web application.

The Daemon instance inside of mini-buildd provides the packager and builder engine (triggered by incoming via the FTP server), and can be enabled/disabled inside mini-buildd.

FAQ

Todo

FAQ: Daemon prepare does not finish.

Increase entropy on the system, either using the physical mouse, keyboard, etc, or alternatively by installing haveged:

# apt-get install haveged

Sources

This groups all models that determine what APT sources are available, and where to get them.

You will later interface with Source and PrioritySource when dealing with chroots and distributions.

A Source is usually identified sufficiently by Origin and Codename.

FAQ

Todo

FAQ: Can’t prepare a source as key verification always fails.

You must add all keys the Release file is signed with.

To make absolutely sure, manually run s.th. like:

$ gpg --verify /var/lib/apt/lists/PATH_Release.gpg /var/lib/apt/lists/PATH_Release

for the Release in question to get a list of key ids the source is actually signed with.

Repositories

On the System

The actual repositories are managed via reprepro, and live in ~/repositories – each repository in its own subdir.

You normally don’t need to, but it’s technically perfectly fine to manually do package manipulations (on the shell, as user mini-buildd) using reprepro commands. I this case, of corse, it’s in your power to meet or loosen restrictions that otherwise mini-buildd inflicts on the repository.

You must not manually change any repository’s configuration though, as these are handled/written by mini-buildd’s configuration.

Note

To be able cope with multiple versions (reprepro does only allow one package version per dist) each distribution also has several additional *-rollbackN distributions configured.

Layouts

It’s highly recommended to just stick with one of the default Layouts, as produced by the Defaults wizard.

In case you really need a custom layout, it’s recommended not to change the Default Layouts, but to create a new Layout profile with an appropriate name.

The Default Layout’s semantics are outlined in User’s Manual.

The Debian Developers Layout is meant for mimicking a layout like in Debian unstable (no version restriction, upload to meta a distribution names like unstable) to test build packages meant for Debian.

You will interface with Layouts in Repositories, determining what suites (and rollback distributions) are available, which suites are uploadable, and which suites migrate, etc...

Stay In Sync With Default Layout Changes

In general, all the wizards never touch existing objects. This means, on existing systems, there is currently (1.0.x) no way (unfortunately) to stay on or easily upgrade to the defaults as provided by mini-buildd wizards.

For those who deliberately want to upgrade to these (recommended) defaults, here are instructions how to do this manually:

1.0.17: New Hotfix Suite

New in version 1.0.17.

  1. Enter the web application’s configuration section and login as superuser admin.
  2. For Layouts Default and Default (no rollbacks)
    1. Enter the editor for that layout.
    2. Add a new Suite Option (note: last entry shown in the list is for that purpose).
      • Extra Options: Rollback: 4
      • Suite: hotfix (note: you may need to add this; look for the green “+” sign below suite name.)
      • Uploadable: yes
      • Experimental: no
      • Migrates to: stable
      • Not Automatic: yes
      • But Automatic Upgrades: yes
  3. Re-index (PCA) all affected repositories.

Meta-Distributions

Meta-Distributions can be set in a Layout’s “Extra Options”.

Meta-Distributions may be seen as workaround to be able to upload (i.e., via debian/changelog) to other distributions than to the generic <codename>-<repoid>-<suite> format.

For example, the built-in “Debian Developers” Layout has mappings for unstable and experimental by default.

Note that these mappings are per Layout (and then, eventually, per Repository), but the final overall mapping must still be unique for the whole mini-buildd instance (as we only have one incoming, and the incoming change’s distribution must be unambigious).

So, when using this feature, this usually means:

  • Make sure only one repository uses a Layout with Meta-Distributions configured (recommended).
  • Make any meta mapping key appear only once in each used Layout.

Changed in version 1.0.25: Ambiguity of the global meta distribution map is now checked for (on repository checks and implicitly on package builds).

Distributions

Distributions determines how and for what architectures a base distribution is to be build:

  • What base distribution? (sid, wheezy, lenny, ...)
  • With what extra sources? (Debian Backports, ...)
  • What components to support? (main, contrib, non-free, ...)
  • With what generic build options? (resolver, lintian, ccache, eatmydata, ...)
  • For what architectures? (i386, amd64, armel, ...)

Todo

BUG: eatmydata: Builds fail when linked with openvc

Only a problem in current (Jan 2014) sid. See [6].

Repositories

A repository represents one apt repository managed via reprepro:

  • What repository identity? (“codename-identity-suite”)
  • What mini-buildd Layout? (“codename-identity-suite”, supported suites and their semantics)
  • What mini-buildd Distributions? (“codename-identity-suite”)
  • What misc configuration to use? (reprepro, static GPG auth, notify, ...)

Uploaders

Uploader instances are created automatically to each user profile. The administrator may activate GPG keys a user has uploaded, and decide what repositories he is allowed to upload.

Chroots

Adding (active) chroots to your mini-buildd instance implicitly makes it a builder.

Preparing a chroots will both bootstrap it, and create configuration on the system so it can be used via schroot.

You can chose amongst a number of schroot backends; to be able to be supported by mini-buildd, the backend must support snapshots (compare man 5 schroot.conf).

At the time (Oct 2016) of this writing, mini-buildd supports these backends:

Type Options Build size limit Speed Extra fs Extra dependencies  
Dir aufs, overlayfs, unionfs, overlay No Medium No Kernel support (aufs <= jessie, overlay >= stretch) Recommended
File compression No Low No No  
LVM loop, given LVM setup Yes Fast Yes LVM tools, Kernel support (dm, in Debian standard kernel)  
BTRFS none No ??? Yes btrfs host file system, btrfs-progs  

In short, we recommend directory based chroots via aufs using 3.2.35 =< Debian Linux Kernel < 3.18 (jessie-) and recommend directory based chroots via overlay with kernels > 3.18 (stretch+) as best compromise. It offers acceptable speed, and no limits.

File chroots are also fine, they will just always work; you may think about configuring schroot to use a tmpfs for its snapshots (if you have enough RAM), and use no compression to speed it up.

If you are in for speed, or just already have a LVM setup on your system, LVM chroots are good alternative, too.

Note

You may configure Distributions with generic build options that may also affect the backend (like pre-installing eatmydata) or build (like configuring ccache to be used) speed. See Distributions and Repositories.

FAQ

Todo

BUG: For some distributions, schroot doesn’t work with systemd (/dev/shm).

See this [1] schroot bug for more information.

mini-buildd comes with a crude temporary workaround, see (and please read the comments in) /usr/share/doc/mini-buildd/examples/09bug728096shmfixer. Just symlink in schroot’s setup.d:

# cd /etc/schroot/setup.d
# ln -s /usr/share/doc/mini-buildd/examples/09bug728096shmfixer .

to enable.

Todo

FAQ: How to use foreign-architecture chroots with qemu.

Tested with ‘armel’ (other architectures might work as well, but not tested).

Install these additional packages:

# apt-get install binfmt-support qemu-user-static

You will need a version of qemu-user-static with [2] fixed.

In the Chroot configuration, add a line:

Debootstrap-Command: /usr/sbin/qemu-debootstrap

to the extra options. That’s it. Now just prepare && activate as usual.

Todo

BUG: debootstrap fails for <=lenny chroots on >=jessie host kernel (uname).

See [3]. This should ideally be worked around in debootstrap itself eventually.

mini-buildd comes with a workaround wrapper /usr/sbin/mbd-debootstrap-uname-2.6. Just add:

Debootstrap-Command: /usr/sbin/mbd-debootstrap-uname-2.6

to the chroot’s extra options to work around it (the default chroots created with the chroot wizard already include this workaround for lenny and etch chroots, btw).

Fwiw, this is due to older libc6 packaging’s preinst, which will meekly fail if uname -r starts with a two-digit version; i.e.:

FINE : 3.2.0-4-amd64      Standard wheezy kernel
FAILS: 3.10-2-amd64       Standard jessie/sid kernel
FAILS: 3.9-0.bpo.1-amd64  Wheezy backport of the jessie/sid kernel

Todo

BUG: Fails to build “all” packages with “build archall” flag set to arch “x” in case DSP has >= 1 arch “all” and >=1 arch “y” binary package

This is due to sbuild and in in more detail explained here [4].

A bad one-package workaround would be to change the “build archall” flag to arch “y”.

Todo

BUG: LVM chroots fail running lvcreate with ‘not found: device not cleared’

Unclear (?). See [5] or http://lists.debian.org/debian-user/2012/12/msg00407.html .

“–noudevsync” workaround makes lvcreate work again, but the chroot will not work later anyway later.

Todo

FAQ: Chroot creating fails due to missing arch in archive (partial mirror).

This might occur, for example, if you use a (local) partial mirror (with debmirror or the like) as mini-buildd archive that does not mirror the arch in question.

At the moment, all archives you add must provide all architectures you are going to support to avoid problems.

Todo

FAQ: sudo fails with “sudo: no tty present and no askpass program specified”.

Make sure /etc/sudoers has this line:

#includedir /etc/sudoers.d

(This is sudo’s Debian package’s default, but the administrator might have changed it at some point.)

Remotes

Remotes can interconnect a mini-buildd instance with another in a peer-to-peer fashion, i.e., you need to add a respective remote instance on both two peers. When interconnected, these two instances automatically share their build chroots.

To interconnect two mini-buildd instances

  1. Add remote on instance0 for instance1; prepare, check, and activate it. Activation will initially fail, but it will be put on auto-reactivate (A).
  2. Add remote on instance1 for instance0; prepare, check, and activate it. Activation will work as instance0 already knows us, and is on auto-reactivate.
  3. Run Activate remote on instance0.

Note

Be sure to use the exact same host names as given in the resp. instance’s Daemon configuration!

Odds and Ends

Keyring and test packages

On mini-buildd’s home, you will find action buttons to create+build keyring packages, as well as running test packages.

linux.deb >= 4.8.5: You may need to re-enable vsyscall

In Debian kernel packages since 4.8.4-1~exp1:

[ Ben Hutchings ]
* [amd64] Enable LEGACY_VSYSCALL_NONE instead of LEGACY_VSYSCALL_EMULATE.
  This breaks (e)glibc 2.13 and earlier, and can be reverted using the kernel
  parameter: vsyscall=emulate

I.e.: When running the Debian standard kernel and your mini-buildd instance needs to support wheezy or earlier, you need to re-enable this (in /etc/default/grub).

On any running kernel, this is a poor man’s check to see if vsyscall is still enabled on your system:

grep "\[vsyscall\]" /proc/self/maps

See also

[7], linux package’s NEWS file.

django: Avoid downgrades (does not start after downgrade)

mini-buildd usually is compatible with several django main versions (see control file). This, package-wise, allows for downgrading django (maybe you want to go back from backports to stable for some reason).

This, however, will mostly always cause problems as the SQL database scheme of your app has already been updated.

In case this already has happened, you can only upgrade django again (or somehow try to manually downgrade mini-buildd’s SQL (~/config.sqlite) if you dare).

Cruft in ~/var/log

With mini-buildd <= 1.0.17, rejected packages where logged here too, which may have lead to cruft that is never cleaned up. You may run:

~mini-buildd? /usr/share/doc/mini-buildd/examples/reject-cleanup

as user mini-buildd to find and get rid of them.

Import a foreign archive key to an existing mini-buildd instance

  1. Stop the mini-buildd service.
  2. Become the mini-buildd user.
  3. Manipulate the user’s GPG keyring
    • Be sure it contains exactly one key (pub+sec) when done.
  4. (Re)start the mini-buildd service.
    • Check that the Daemon key has actually changed (f.e., on the web home, right bottom).
  5. Make a pseudo change to all repository instances.
    • Just enter the repo editor, don’t actually change anything, but do “save”.
    • This fixes the status to “Prepared (Changed)” (matching the external manipulation).
  6. “PCA” ((re)prepare, check, create) all repositories.
    • This should bring the new key to the reprepro indices.
  7. Re-create keyring packages.

Note

The Daemon instance does not touch the GPG setup once it’s created – unless you do an explicit remove on the instance.

Migrate packages from 0.8.x

Note

A much simpler solution might be to just serve the old repository directory (~/rep) via some standard web server, and just continue to use it along with your new repo as long as needed.

This roughly explains the steps needed to upgrade a mini-buildd 0.8.x installation to 1.0.x with transferring the packages from the old 0.8.x repositories over, so you can continue with the new 1.0.x repos only:

  1. Upgrade mini-buildd from 0.8.x to 1.0.

    Chances are this might have already implicitely happened, with some update.

    You will then have 1.0 up and running, and ye olde 0.8.x repositories still available as read-only apt repositories.

    Just be sure you don’t purge the old package, and then install 1.0, as this will remove the whole old repository.

  2. Configure mini-buildd 1.0.

    This means you should, in the end, have a 1.0 repository with the same identity as the old 0.8.x repository, and with all distributions you want to migrate.

  3. Import packages.

    Become mini-buildd user, and got to the new 1.0 reprepro repository you want to import to, and use the importer script to migrate packages:

    # su - mini-buildd
$ cd repositories/REPOID
$ /usr/share/doc/mini-buildd/examples/import-08x ~/rep/squeeze-REPOID-experimental squeeze-REPOID-experimental
$ /usr/share/doc/mini-buildd/examples/import-08x ~/rep/squeeze-REPOID squeeze-REPOID-unstable

    This example is for squeeze; repeat the imports for all base distributions you want to migrate.

    Thusly, ye olde *-experimental distribution will be migrated to the distribution with the same name in 1.0. Ye olde squeeze-REPOID goes to squeeze-REPOID-unstable. For the latter, multiple package version will be automatically installed to the new rollback distributions (which are needed with reprepro to support multiple package versions).

  4. (Optional) Fix up package status.

    All the migrated packages are now in 1.0 “unstable” distribution; you may think of bulk-migrating them all to “stable”, if that were your semantics for the 0.8.x non-experimental distributions.

Eventually, when everything is updated, you may of course (re)move the old 0.8.x directory ~/rep/.

See also

https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=790292